English
简体中文Use steps of PVD coating equipment
Use steps of PVD coating equipment Before use, each power switch and operation button should be in the off position, and connect the water source, gas source and power source. 1. Turn on the vacuu...
May 05,2022
Use steps of PVD coating equipment Before use, each power switch and operation button should be in the off position, and connect the water source, gas source and power source. 1. Turn on the vacuu...
May 03,2022
What is Physical Vapor Deposition Physical vapor deposition technology refers to the use of physical methods under vacuum conditions to vaporize the surface of a material source (solid or liquid) into...
Apr 28,2022
Under the same discharge conditions of multi-arc cathodes (such as the same arc ignition voltage, the same working atmosphere and the same vacuum degree, etc.), the ion-coated cathodes with very clean...
Apr 21,2022
A unique combination of extreme hardness and low friction for superior wear resistance Within the universe of wear-resistant thin films, diamond-like carbon (DLC) coatings have emerged as the ideal s...
Apr 12,2022
Cleaning is to remove oil, rust, dust, etc. on the workpiece by chemical or (and) physical methods to ensure that the workpiece obtains better coating adhesion and the smooth progress of production. C...
Apr 06,2022
Thermal energy consumption analysis of coating machine setting machineOil: It comes from the properties of the fabric and the previous process. For example, the waste gas contains a lot of oil mist wh...
Apr 01,2022
Vacuum coating technology, simply put, is to use evaporation, sputtering, etc. to emit film particles in a vacuum environment, and deposit them on metals, glass, ceramics, semiconductors, plastic part...
Mar 23,2022
As a functional part, car lights are required to have excellent heat resistance, mechanical properties, low fog value, and good appearance. Usually, in order to achieve a good appearance and reflectio...
Mar 14,2022
In vacuum coating machine is widely used in life, because it is non-polluting, has the advantages of fast deposition speed, high ionization rate, large ion energy, simple equipment operation, low cost...
The problem of holes in the film when the vacuum coating machine is aluminized can generally be solved by the following methods: ①The aluminum material in the evaporation boat is too full. Solution: ...
Vacuum coating equipment coating technology is divided into three general directions, evaporation coating technology, ion coating technology, magnetron sputtering coating equipment, each coating techn...
The magnetron sputtering vacuum coating machine consists of many components, each of which has its own unique use, and is indispensable. The magnetron sputtering vacuum coating machine consists of a v...
There are several coating technologies for vacuum coaters, each of which has its own advantages. According to the customer's demand for the film layer and the substrate that the customer needs to c...
Tribological coating is a process to improve the tribological properties of materials. The process involves coating steel spheres with nanocomposite coatings that contain WC1-x nanocrystalline carbon ...
The glass-to-metal sealing structure of PVD vacuum coating equipment needs to meet the requirements of sealing parts with baking resistance, a certain strength, air tightness, and good electrical insu...
Tel: 0086-15867869979
E-mail: [email protected]
Contact: Sara Sun wechat: 0086-15867869979
Add: No. 9 Shao South Road, Yuyao, Ningbo City, Zhejiang Province
Wholesale PVD Coating Machine Manufacturers
Copyright © Ningbo Honyu Vacuum Technology Co., Ltd.All Rights Reserved.