Jun 10,2022
Introduction to the basic knowledge of PVD vacuum coating machine coating To enter a new industry, you need to start with the most basic knowledge, and then gradually deepen the research. The same ...
Jun 09,2022
How does vacuum coating equipment make gradient colors? Vacuum coating equipment refers to the use of low-voltage, high-current arc discharge technology under vacuum conditions, using gas discharge to...
Jun 02,2022
The mechanical pump of the vacuum coating machine is also called the backing pump. The mechanical pump is the most widely used low vacuum pump. It uses oil to maintain the sealing effect and contin...
Jun 01,2022
Vacuum coating machines can be classified according to the function of vacuum furnace Vacuum coating machines can be classified according to the industry, such as lens vacuum coating machines, electro...
May 23,2022
Common Problems of Evaporation Process and Sputtering Process of Vacuum Coating Equipment 1. Why can vacuum coating be made into different colors and seven colors? Because a layer of UV varni...
May 20,2022
Evaporation vacuum coating machine and physical principle introduction The evaporation vacuum coating machine is mainly composed of a vacuum chamber and a vacuum pumping system. The vacuum chamber c...
May 18,2022
How to maintain and maintain the vacuum coating machine In order to reach the ideal vacuum, the vacuum coating machine must be equipped with a vacuum pumping system, then the diffusion pump is one of...
May 12,2022
PVD ion coating classification PVD ion coating is divided into two categories: decorative coating and tool coating. The film layer of decorative plating is relatively thin, and its main purpose is to ...
May 11,2022
How to remove the film layer of coated glass Coated glass is divided into evaporation coating, magnetron sputtering coating and online vapor deposition coating glass. Because the method of preparing t...
The problem of holes in the film when the vacuum coating machine is aluminized can generally be solved by the following methods: ①The aluminum material in the evaporation boat is too full. Solution: ...
Vacuum coating equipment coating technology is divided into three general directions, evaporation coating technology, ion coating technology, magnetron sputtering coating equipment, each coating techn...
The magnetron sputtering vacuum coating machine consists of many components, each of which has its own unique use, and is indispensable. The magnetron sputtering vacuum coating machine consists of a v...
There are several coating technologies for vacuum coaters, each of which has its own advantages. According to the customer's demand for the film layer and the substrate that the customer needs to c...
Tribological coating is a process to improve the tribological properties of materials. The process involves coating steel spheres with nanocomposite coatings that contain WC1-x nanocrystalline carbon ...
The glass-to-metal sealing structure of PVD vacuum coating equipment needs to meet the requirements of sealing parts with baking resistance, a certain strength, air tightness, and good electrical insu...
Tel: 0086-15867869979
E-mail: [email protected]
Contact: Sara Sun wechat: 0086-15867869979
Add: No. 9 Shao South Road, Yuyao, Ningbo City, Zhejiang Province
Wholesale PVD Coating Machine Manufacturers
Copyright © Ningbo Honyu Vacuum Technology Co., Ltd.All Rights Reserved.
English
简体中文